SACFORM / AGMline provides to Customers' High Speed and Cost Effective Production Systems for Cable Tray Production Lines.
We specially design Cable Tray Production Systems regarding to Our Cutomers' Requirements.
Medium Duty - Cable Trays
Cable Trays can be produced with the dimensions between 50 – 1000 mm and flange dimensions between 25 – 100 mm. There is no limitation to produce in length of the tray. In case of Customer’s special request, the production system can be redesign in special dimensions.
Heavy Duty - Cable Trays
Depending on the cable cross section area, flange heights might varies from 40mm, 60mm ve 100mm. There is no limitation in length of the tray
Cable Tray Production System is able to produce cable trays in web dimensions from 50mm to 1200mm. In case of Customer’s special request, the production system can be redesign in special dimensions
Cable flange heights can be 40 mm, 60 mm and 100 mm. There is no limitation in length of the tray ladder.
According to the characteristics of the project and the cross sections used; the product's web dimensions which can be used horizontally and vertically are from 100 mm up to 600mm
Cable Tray Connection Brackets
Connection Brackets can be produced with Sacform’s production solutions. Brackets enable cable trays and cable ladders to be easily installed according to the place of use and also brackets provide the most suitable carriage strength.
Main Cable Tray Accessories are Cable Tray Cover, Vertical Angle Tray, Horizontal Angle Tray, Horizontal Cross, Inside Riser, Outside Riser, Straight Reducer, Angle Connector, Expansion Connector, U Channel, Coupler, Splitter, Width Adapter, Tray Separator, Mounting Plate Bracket, Swivel connector.
Please fill in the maximum coil dimensions you require.